Choose FY-SS01-180 for light, compact jobs and limited floor space.
FY-SS01
FY-SS01 Shredder Series
Choose from compact standard models for routine factory scrap or integrated two-stage four-shaft models when a finer reduction path is required. Selection is based on the real material—not model number alone.
FYXFER FY-SS01 and FY-SS02 shredder selection guide
▶
Watch the demonstration
FYXFER material demonstration · configurations shown vary by application
01
Start with the job, then choose the model
Fast Selection
This route separates small-feed work, daily factory recycling, stronger compact machines, finer integrated reduction, and heavy-duty project waste.
Start with FY-SS01-300 for regular manageable production waste.
Step up to FY-SS01-400 or 500 after material review.
Review a 300-2S, 400-2S or 500-2S upper/lower cutting arrangement.
Move to the FY-SS02 heavy-duty project platform.
02
Watch shredding demonstrations before choosing a model
Material Demonstration
See bottles and cans, cardboard tubes and board, and metal sections being processed in this FYXFER demonstration video.
Watch this demonstration on YouTube
Match the machine to your material. The video shows more than one machine setup. It is not a capacity test for a single FY-SS01 model and does not mean every model can process every material shown. Confirm material, dimensions, thickness, cutter configuration and required output before selecting a model. Use suitable guarding and trained operators, following the machine-specific operating instructions.
Send your material photos and requirements for a selection review
03
FY-SS01-180 / 300 / 400 / 500
Standard Compact Models
Compact machines for controlled in-plant size reduction. Power, chamber, cutters and physical size rise by model; final suitability still depends on the material.
Mini
FY-SS01-180
Small parts and light intermittent work
Drive1.5 kW
Supply220 V, 1 phase
Cutters21 × Ø90 × 8 mm
Chamber180 × 190 mm
WeightApprox. 120 kg
Best starting point: workshops, small offcuts and low-volume recycling where compact size matters most.
Daily Use
FY-SS01-300
Routine plastic production scrap
Drive3 kW
Supply380 V, 3 phase
Cutters24 × Ø180 × 12 mm
Feed reference500 × 500 × 300 mm
WeightApprox. 400 kg
Best starting point: regular runners, trims, offcuts and manageable rejected parts.
Stronger Compact
FY-SS01-400
Wider feed and stronger torque class
Drive4 kW
Supply380 V, 3 phase
Cutters26 × Ø180 × 15 mm
Feed reference600 × 500 × 300 mm
WeightApprox. 500 kg
Best starting point: larger routine parts or applications that need more torque than the 300 class.
Largest Compact
FY-SS01-500
Higher-drive compact configuration
Drive7.5 kW
Supply380 V, 3 phase
Cutters24 × Ø200 × 20 mm
Feed reference700 × 700 × 350 mm
WeightApprox. 750 kg
Best starting point: bulkier consistent feed that still fits a compact factory-side workflow.
04
FY-SS01-300-2S / 400-2S / 500-2S
Two-Stage Four-Shaft Models
An integrated upper and lower cutting arrangement for projects that need a secondary reduction path. Output size and throughput must be confirmed with the actual material.
Two Stage
FY-SS01-300-2S
Compact integrated upper/lower cutting
Upper drive3 kW
Lower drive3 kW
Upper cutters24 × Ø180 × 12 mm
Lower cutters28 × Ø180 × 10 mm
Reference weightApprox. 1,200 kg
Choose when: one integrated line needs primary tearing followed by finer secondary reduction.
Two Stage
FY-SS01-400-2S
Wider two-stage four-shaft configuration
Upper drive4 kW
Lower drive4 kW
Upper cutters26 × Ø180 × 15 mm
Lower cutters49 × Ø180 × 8 mm
Supply380 V, 3 phase
Choose when: feed and desired output require a stronger two-stage route than the 300-2S class.
Two Stage
FY-SS01-500-2S
Highest-drive integrated 2S configuration
Upper drive11 kW
Lower drive7.5 kW
Upper cutters24 × Ø200 × 20 mm
Lower cutters32 × Ø200 × 15 mm
Side hopper700 × 700 × 350 mm
Choose when: the largest FY-SS01 integrated two-stage build is required after material testing.
05
Five inputs prevent the wrong machine choice
Before Ordering
1. Material and photographsIdentify polymer, metal content, moisture and contamination.
2. Maximum feed dimensionsGive normal and worst-case size, shape and wall thickness.
3. Required output conditionDefine the downstream process and acceptance method.
4. Required volumeProvide kg/h, per shift or daily amount as a project target.
5. Site requirementsConfirm voltage, workspace, feeding, discharge and duty cycle.
06
Send the material before choosing the model
Application Review
FYXFER will compare the feed, desired result and operating conditions against the seven FY-SS01 configurations—or redirect the project to FY-SS02 when the waste is too bulky or demanding.
Reference configurations shown. Machine appearance, electrical supply, guarding and final specifications may vary by approved project configuration.
07
Reference specifications by model
Verified Comparison
Values below come from the individual supplier specification sheets. Missing or variable values are deliberately not estimated.
| Model | Drive | Speed | Cutter configuration | Feed / chamber reference | Reference weight |
|---|---|---|---|---|---|
| FY-SS01-180 | 1.5 kW; 220 V 1P | 25 rpm | 21 × Ø90 × 8 mm | 180 × 190 mm chamber | Approx. 120 kg |
| FY-SS01-300 | 3 kW; 380 V 3P | 16 rpm | 24 × Ø180 × 12 mm | 500 × 500 × 300 mm | Approx. 400 kg |
| FY-SS01-400 | 4 kW; 380 V 3P | 12 rpm | 26 × Ø180 × 15 mm | 600 × 500 × 300 mm | Approx. 500 kg |
| FY-SS01-500 | 7.5 kW; 380 V 3P | 15 rpm | 24 × Ø200 × 20 mm | 700 × 700 × 350 mm | Approx. 750 kg |
| FY-SS01-300-2S | 3 + 3 kW; 380 V 3P | 15 / 21 rpm | Upper 24 × Ø180 × 12; lower 28 × Ø180 × 10 | Confirm by drawing | Approx. 1,200 kg |
| FY-SS01-400-2S | 4 + 4 kW; 380 V 3P | Upper 15 rpm; lower confirm | Upper 26 × Ø180 × 15; lower 49 × Ø180 × 8 | Confirm by drawing | Confirm by quotation |
| FY-SS01-500-2S | 11 + 7.5 kW; 380 V 3P | Upper 15 rpm; lower confirm | Upper 24 × Ø200 × 20; lower 32 × Ø200 × 15 | 700 × 700 × 350 mm side hopper | Confirm by quotation |
Capacity and output size are material-dependent. Send representative photos or samples, maximum feed dimensions, required output condition, hourly or shift volume, contamination and destination power. Final data follows the approved quotation and drawings.
↓
Downloads
↗
Related equipment
More published configuration details
+
Compare mini, standard compact and integrated two-stage configurations using the actual material and reduction objective.
FY-SS01-180 · FY-SS01-300 · FY-SS01-400 · FY-SS01-500 · FY-SS01-300-2S · FY-SS01-400-2S · FY-SS01-500-2S
FY-SS01
Tell us what you need.
Describe the material and feed size, then the required output and downstream handling. Add the duty and loading method when known.