Bulky Material Intake
A large hopper and dual-shaft chamber can be configured for irregular and oversized feed.
Products / Waste Shredder Series
Heavy-Duty Industrial Size Reduction
FY-SS02 Heavy-Duty Industrial Shredder
A robust dual-shaft shredding platform for bulky, tough, mixed, or demanding industrial materials that require controlled low-speed, high-torque size reduction.
Dual-Shaft CuttingIntermeshing cutters for demanding feed
High-Torque DriveConfigured for the actual material load
Protected ControlOverload response and reversible operation
Export SupportManufacturing, loading, and handover
Product Overview
Strong primary reduction for difficult industrial waste
The FYXFER heavy-duty shaft shredder uses two slow-running cutter shafts to grip, tear, shear, and reduce bulky or resistant materials. The machine is configured around feed condition, material behavior, required output, and downstream process.
✓
Positive material engagementCounter-rotating shafts help pull suitable bulky and irregular feed into the cutting chamber.
✓
Controlled low-speed processingReduce demanding material with a torque-focused operating approach.
✓
Overload responseControls can stop and reverse the shafts when the confirmed protection logic is triggered.
✓
Application-specific configurationMatch the hopper, shafts, cutters, drive, discharge, guarding, and controls to the project.
Key Benefits
Built for tough feed and continuous industrial workflows
A heavy-duty primary shredder for projects where material size, toughness, bulk, contamination, or feed variability exceeds the practical range of a compact standard machine.
High-Torque Reduction
Drive and cutter selection focus on controlled tearing and shearing under demanding loads.
Material Volume Reduction
Prepare suitable waste for transfer, sorting, recovery, disposal, or downstream processing.
Overload Protection Logic
Stop and reverse functions can support recovery from material overload and jamming events.
System Integration
Feeding conveyors, discharge conveyors, separators, and supporting controls can be reviewed.
Project-Based Construction
Frame, hopper, shafts, cutters, drive, maintenance access, and guarding are defined by scope.
How It Works
A controlled heavy-duty primary shredding process
Prepare and feed
Confirm the waste stream and load material through the agreed manual or mechanical method.
Engage the shafts
Counter-rotating cutters grip and draw suitable material into the cutting chamber.
Tear and shear
The shaft and cutter arrangement reduces the feed through controlled high-torque action.
Discharge onward
Transfer reduced material to collection, sorting, separation, or the next processing stage.
Machine Configuration
Configured around feed severity and downstream requirements
Share the material composition, normal and maximum piece size, bulk density, contamination, feeding method, expected throughput, target output, and downstream process. Photos, video, and representative samples improve selection accuracy.
Core Machine Functions
- Dual counter-rotating cutter shafts
- Torque-focused drive and transmission system
- Automatic stop and reverse protection strategy
- Heavy frame, hopper, and cutting chamber structure
- Operator controls, emergency stops, and guarding
Available Project Options
- Hopper dimensions and loading arrangement
- Shaft, cutter, spacer, and chamber configuration
- Hydraulic or electric drive approach by application
- Feeding and discharge conveyor integration
- Magnetic separation, sorting, and downstream interfaces
| Machine Type | Heavy-duty dual-shaft industrial shredder |
|---|---|
| Suitable Feed | Bulky, tough, mixed, irregular, or demanding industrial waste after application review |
| Cutting System | Dual shafts and cutter geometry configured for the confirmed material and required result |
| Drive | Electric or hydraulic arrangement evaluated according to torque, duty, and control needs |
| Capacity | Selected according to actual feed condition, loading method, target output, and duty cycle |
| Power Supply | Configured for the destination market and project |
| Customization | Hopper, shafts, cutters, frame, drive, conveyors, guarding, separation, and controls |
Product Selection
When should you choose the heavy-duty platform?
Selection depends on the most difficult material in the stream—not only the average piece.
Bulky, tough, mixed, or highly variable waste
Use this platform when feed pieces are larger, harder to grip, more resistant, contaminated, or require a stronger primary reduction stage.
Routine and manageable plastic production scrap
A compact standard shredder may be more practical for suitable runners, trims, offcuts, small rejected parts, and regular in-plant plastic waste.
Equipment & Delivery
Review the machine, cutting chamber, and export preparation
The supplied configuration should be checked against the confirmed material and project scope. Export loading and securing are planned around the final machine dimensions and shipping method.
Applications
Typical heavy-duty waste streams for evaluation
Bulky Plastic Waste
Review large molded parts, thick sections, crates, containers, and mixed rigid plastic feed.
Rubber & Tire Materials
Evaluate suitable rubber products and tire-derived feed according to construction and steel content.
Wood & Pallet Waste
Reduce suitable wood, pallet, board, and packaging waste after contamination review.
Textile & Flexible Waste
Assess dense, bundled, or difficult flexible material for the correct shaft and feeding arrangement.
Light Metal & Mixed Scrap
Review suitable metallic or mixed feed carefully for cutter, drive, wear, and separation needs.
Commercial & Industrial Waste
Prepare suitable mixed waste streams for sorting, recovery, transfer, or downstream processing.
Frequently Asked Questions
Planning your heavy-duty shredding project
What information is needed for machine selection?
Please provide material composition, minimum and maximum piece size, weight or bulk density, contamination, hourly or daily volume, feeding method, target output, downstream process, site limits, and destination power supply. Photos, video, and samples are strongly recommended.
How is the cutter configuration selected?
Cutter thickness, geometry, spacing, shaft arrangement, and material are reviewed around the feed and required result. The most difficult expected material should be disclosed before configuration is confirmed.
What happens if the shredder is overloaded?
The control strategy can stop and reverse the shafts when the configured overload condition is detected. This supports recovery, but unsuitable material and operating limits must still be managed correctly.
Can the shredder process mixed waste?
Possibly, but mixed streams require careful review. Metal, stone, hazardous material, liquids, pressure vessels, batteries, and other contaminants may require removal or dedicated upstream preparation.
Can conveyors and separation equipment be integrated?
Yes. Feeding conveyors, discharge conveyors, magnetic separators, sorting equipment, and control interfaces can be evaluated according to the complete process flow.
How is the machine prepared for overseas delivery?
Export preparation is planned around the final machine dimensions, weight, lifting points, protection method, securing plan, documentation, and selected shipping route.
FY-SS02 Project Model Map
Heavy-duty classes from 600 to 1600
The model code identifies the FYXFER project class. It does not by itself define motor power, feed width or capacity; final configuration follows the actual waste stream and approved drawing.
FY-SS02-600S
Compact single-drive 600-class starting point for reviewed heavy-duty materials.
Verified reference: 11 kW drive; final application review required.Request configurationFY-SS02-600D
Dual-drive 600-class option when the single-drive route is not appropriate.
Project-specific drive, cutters and feed arrangement.Request configurationFY-SS02-800
Medium heavy-duty project class for larger, tougher or more variable waste.
Final specifications after material review.Request configurationFY-SS02-1000
Expanded heavy-duty class for industrial feeding and downstream integration.
Final specifications after material review.Request configurationFY-SS02-1200
Large project class for demanding primary reduction and engineered line layouts.
Drive, cutters and dimensions confirmed by approved drawing.Request configurationFY-SS02-1400
Large industrial project class for bulky-feed systems and supporting equipment.
Project-specific configuration.Request configurationFY-SS02-1600
Extra-large project class for high-duty industrial waste-processing lines.
Project-specific configuration.Request configuration throughput, output size, motor, cutter geometry, feed opening, weight and overall dimensions are not universal across FY-SS02. Send the most difficult material and required process before a model is fixed.
Selection Guide
Is FY-SS02 right for your application?
Evaluate this platform for bulky, tough, mixed or variable waste requiring primary size reduction.
Check the load or material
Disclose the full waste composition, largest and most difficult pieces, density and contaminants.
Define your process
Agree the required output distribution, throughput, feeding method and downstream process.
Confirm the configuration
Confirm cutters, drive, hopper, discharge and duty through project review and a representative trial.
Use this checklist for an initial review. Final machine limits, options and acceptance criteria are confirmed in the project quotation.
FY-SS02 Heavy-Duty Shredder Series
Compare the published project classes and define feed, output, duty and system interfaces before configuration.
FY-SS02-600S · FY-SS02-600D · FY-SS02-800 · FY-SS02-1000 · FY-SS02-1200 · FY-SS02-1400 · FY-SS02-1600
PDF · English · 295.8 KB
FYXFER_FY-SS02_Series_Selection_Guide_EN.pdf
Show us the most difficult material
Send material photos, maximum piece dimensions, contamination, expected volume, feeding method, target output, and downstream process. Our team will help define the appropriate heavy-duty shredder configuration.